Fluid Flows past Spheroids at Moderate Reynolds Numbers

Axisymmetric viscous fluid flows past spheroids are considered. The time-independent complete Navier-Stokes equations written in a spherical coordinate system are used for describing the flow. The problem is solved by the stabilization method on the basis of a variable direction scheme. The input coordinate system is transformed in order to construct a regular computational grid. As a result of the numerical investigation, the stream patterns of flow past elongated and oblate spheroids are obtained for various values of the determining parameters. Numerical values of the dimensions of the circulation zone and the drag coefficient are given for various values of the spheroid semi-axis ratio in the domain of moderate Reynolds numbers.     

湍流相干结构的速度与温度特性

本文采用三分量热线同时测量温度和速度的新技术，测量了加热与制冷平板边界层的速度和温度分布，提出了提取相干结构的雷诺应力准则，根据湍流相干结构速度与温度的相关关系，运用子波分析方法首次确定了相干结构的温度特征尺度和波形。对于研究湍流结构相干结构的速度与温度特性，具有重要的意义。此外，本文还应用数字滤波方法对所分析的湍流相干结构进行了滤波处理，确定了相干结构的平均猝发周期，与条件采样方法相比，两者的结果基本一致。本文实验分析结果还表明：壁面温度对湍流相干结构有一定的影响。     

多失效模式重要抽样法的方差分析及应用

在计算结构体系失效概率时,基于Monte-Carlo数值模拟的重要抽样技术已被实践证明是一种非常有效的方法。重要抽样法中估计量的方差是影响收敛速度和计算精度的重要指标,因此重要抽样法的方差分析是非常必要的。对于单模式而言,其方差分析比较容易。对于多模式情况,其方差分析有一定的困难。这有可能影响重要抽样法在多模式结构体系失效概率计算中的应用。本文详细推导了几种常见重要抽样法的方差计算公式。然后用方差分析的概念,阐明了多模式重要抽样法应用中的一些问题。     

颗粒介质的弹塑性动态本构关系研究

本文运用多刚体系统动力学和微结构连续力学的理论方法，考虑了颗粒体的拓扑结构及颗粒体之间的局部非线性相互作用，通过引进恢复系数，导出了适合于大变形运动（包括平动与转动）情况下，颗粒体间的滑移和分离的客观弹塑性本构关系。     

Film thickness measurement with an ultrasonic transducer

A technique for measuring condensate film thickness using an ultrasonic transducer is described. In the experiment, the condensate film thickness with R-113 and FC-72 (a fluorinert compound developed by the 3M Company) condensing on the horizontal lower surface of a rectangular duct was measured at several locations. From the measured values a power law relation between the condensate film thickness and the axial distance from the leading edge of the condensing surface was derived by regression analysis. Assuming a linear temperature profile in the condensate film, local and average heat transfer coefficients were computed from the condensate film thickness. The average heat transfer coefficients were compared with the values obtained by measuring the heat transfer rate to the coolant. The two values were within ±12% of each other. As yet there is no satisfactory analytical model to predict the local heat transfer coefficient even in the annular condensation regime. One of the main difficulties in modeling the condensation is the lack of a suitable model to predict the interfacial shear stress. With the measurement of the film thickness it is possible to determine the interfacial shear stress. It is hoped that the shear stresses so determined will lead to the development of a satisfactory model for interfacial shear stress with condensation.     

Modelling of flow pattern in a shallow aquifer affected by reservoirs

A compartmental model is developed to estimate flow parameters of a shallow aquifer affected by water loads in surface reservoirs and to evaluate its nonsteady flow distribution. The method incorporates temporal piezometric head measurements and sampling of water for dissolved chemicals and isotopes analyses. Each compartment is governed by a set of equations describing the conservation of linear momentum and mass balance expressions for water, isotopes, and dissolved chemicals. The number of compartmental balance expressions always must be greater than that of the unknown flow parameters associated with each compartment. An optimization method is described to yield spatial distribution of aquifer storativity, transmissivity, porosity, leakage, and compliance coefficients and fluxes leaking into an aquifer's lower boundary. Future predictions of an aquifer's piezometric head distribution in a compartmental system is formulated on the basis of the estimated flow parameters and the leakage components.Compartmental modelling which incorporates concentrations of environmental tracers, may yield efficiency in computing resources and accuracy enhancement for predicting an aquifer's flow regime.     

光纤传感器和压电作动片对薄板振动控制的分析

利用双模模态域光纤传感器的模间干涉感知薄板结构中应变的变化、获得薄板结构振动变化状况，进一步利用压电体作为动元件，减小振幅，实现振动的主动控制，采用振型叠加法和直接积分相结合的方法，从理论上论证薄板分别受到正弦波激振力，脉冲激振力和方波激振力时的振动主动控制，并由脉冲激振下的响应得到控制前后的幅频特性曲线和相频特性曲线．。     

GENERAL SOLUTION OF PLANE PROBLEM OF PIEZOELECTRIC MEDIA EXPRESSED BY "HARMONIC FUNCTIONS

I.IntroductionBecauseofthecouplingcharacteristicbetweenthemechanicaldeformationandthee1ectricaleffect,piezoelectricmaterialshavebeenwidelyusedintransducersandsmartstructures.Moreandmoreattentionshavebeenpaidonsuchmaterials,andgreatadvanceshavebeenmadeinva…     

Dynamic stress of a circular cavity buried in a semi-infinite functionally graded piezoelectric material subjected to shear waves

The paper presents a theoretical method to investigate the multiple scattering of shear waves and dynamic stress around a circular cavity in a semi-infinite functionally graded piezoelectric material. The analytical solutions of wave fields are expressed by employing wave function expansion method and the expanded mode coefficients are determined by satisfying the boundary conditions of the cavity. Image method is used to satisfy the free boundary condition of the semi-infinite structure. According to the analytical expression of this problem, the numerical solutions of the dynamic stress concentration factor around the cavity are presented. The effects of the piezoelectric property, the buried depth of the cavity, the incident wave number and the nonhomogeneous parameter of materials on the dynamic stress around the cavity are analyzed. Analyses show that the piezoelectric property has great effect on the dynamic stress in the region of intermediate frequency and the effect increases with increasing wave number. When the nonhomogeneous parameter of materials is less than zero, it has less influence on the maximum dynamic stress around the cavity; however, it has greater influence on the distribution of the dynamic stress around the cavity. When the nonhomogeneous parameter of materials is greater than zero, it has greater influence on both the maximum dynamic stress and the distribution of dynamic stress around the cavity, especially in the case that the buried depth is comparatively small.     

功能梯度压电材料反平面裂纹问题

基于三维弹性理论和压电理论，导出了材料系数在横观各向同性平面内梯度分布的压电体的状态方程，进而对材料系数指数函数规律分布的半无限大压电体中的反平面裂纹问题进行了求解，利用Fourier变换给出了半无限大压电体中位移，应力，电势及电位移的解析表达式，并求得了裂纹尖端的应力强度因子和电位移强度因子，分析了不同的非均匀材料系数及几何尺寸对它们的影响。